Disclaimer: Opening your machine WILL invalidate your warranty!

Do not attempt this unless you are confident you can undertake the task.

If you have bought one of my flexi's or a battery pack then you now want to know how to fit it!  Alternatively you may want to find out for sure if it is the flexi at fault then the instructions below will explain everything!   If after reading the instructions you decide you cannot manage the fitting yourself then please remember that I provide a Worldwide fitting/repair service for the flexi's.

Series 5mx:-

Fitting/opening instructions are available in 2 formats:-

1. Online/HTML instructions (5 parts)

2. Full instructions in PDF format

   • Part 1 - Opening (494kb)

   • Part 2 - Removing (197kb)

   • Part 3 - Preparation (106kb)

   • Part 4 - Attaching (156kb)

   • Part 5 - Reassembly (282kb)

To ensure you understand the level of skill required to fit the flexi please read the Soldering FAQ section also. Before ordering you need to determine what screen type you have so please read the important note about Sharp/Hitachi screen types.

Revo:-

1. Online/HTML instructions

2. Adobe/PDF instructions (coming soon)

Series 5:-

If you want to dismantle your series 5 to see if it really is the flexi at fault then please use the 5mx instructions until the series 5 instructions are available.  The series 5 is EXTREMELY similar to the 5mx in its assembly.

For local fitting services and soldering tips see the links/Info pages.